The Way Better Blog

Submitted by fredrik.nyman on Fri, 01/25/2019 - 10:02

In this blog I will be writing about some of the topics, big and small, facing network engineers and fibre networks and the kind of challenges I have encountered working with our customers over the past 20 years or so.

Blog posts

European networks unvoluntary casulties of US-China trade-war

Submitted by fredrik.nyman on Mon, 09/02/2019 - 13:19

I usually don't comment on our competition but recent events such as new legislation proposal from the government in Sweden has sparked a well-needed debate. I commented on the situation for Swedish city networks last week in this IDG article https://computersweden.idg.se/2.2683/1.722350/konkurrent-varnar-huawei-stadsnat and also wrote a debat

Turn on automation of your FTTH network

Submitted by fredrik.nyman on Mon, 04/01/2019 - 09:08

The distributed nature of a fiber to the home network means that you will have equipment spread out and you might not always do the on-site installation yourself. If every switch has to pass your desk for pre-configuration port before getting deployed into the field you will need to deal with the logistics of getting the units from your warehouse via your desk, packing and unpacking, and clearly marking them so that the right unit goes into the right location.

SDN and NFV in FTTH

Submitted by fredrik.nyman on Thu, 03/21/2019 - 09:51

I love acronyms. You got three of them in the title of this post.

In recent years we got Software Defined Networking (SDN) and Network Function Virtualization (NFV). Many of the large telcos have invested millions into research of these subjects and are pushing the industry in this direction. Telefonica has expressed high ambitions to move to a completely SDN/NFV enabled network in record time. All the big ones are involved.

Keeping product lines around

Submitted by fredrik.nyman on Fri, 03/15/2019 - 09:50

Building fibre to the home networks are different from any traditional enterprise or telecommunications network. One of the main differences is the time it takes to complete the network. You make a plan, design a an architecture with VLANs and redundancy and imagine how this will scale as the number of connected customers increase. But then the years go by, because building a fibre network to connect every home in the community can take decades.

Save the planet - work from home

Submitted by fredrik.nyman on Thu, 03/07/2019 - 10:30

In my last post i revealed how dirty a fiber network can be depending on the source of electricity powering the network. I showed how a typcial 24-port access switch might contribute anything between 23kg to 485kg of carbon dioxide per year to the atmosphere depending on the electricity mix and how that can be reduced with lowpower optical modules.

How do you troubleshoot IoT devices?

Submitted by fredrik.nyman on Fri, 02/15/2019 - 13:00

Continuing on the subject of troubleshooting the network. Troubleshooting MPEG video has the benefit of a user that can tell you if it doesn't work and you can simply ask that user if the problem persists once you have fixed it. But what if there isn't any obvious way to determine if things are working, for example is that trashcan really signalling that its' full or does the temperature device really update the building climate control properly?